DMR Dual Channel Radio
Introduction
The dual receive radio comes in two variants, the 10-watt and 5-watt versions. By default, we are...
Getting Started with Your Speedtech Radios
Pre-Installation Testing We've designed these radios to be straightforward to use. Before install...
Radio Components
It is important to understand the different components and buttons around the radio. These enable...
Installing Your Handheld DMR Race Radio
What You Need Your DMR handheld radio A suitable mounting location in the car Optional: adhesive...
LCD Display
Firstly, to determine the default settings for the radio. This is MOST likely how you will have t...
Enable Keypad
If you get a message saying the "Keypad is locked", you have 2 options to unlock it. Turn the ...
Standby Channel Recieve Dissable
The radio can disable one of the channels. To disable a channel, ensure the channel that you want...
V3 Firmware Analogue Channels Guide
We have seen some customers experiencing interference with the radios on the Analogue channels. W...
How to Change Receive Channel
The radio receives a second channel, and in New Zealand we have 2 channels that could be used at ...
Setting the Squelch (Only applies to ANALOGUE Channels)
Analogue channels are susceptible to noise. Noise can be described in many ways and is often reco...
Radio Communication Troubleshooting Guide
Before You Start Make sure both radios are powered on and set to the same channel. This is the mo...