Skip to main content

Standby Channel Recieve Dissable

The radio can disable one of the channels. To disable a channel, ensure the channel that you want to disable is not the active channel. You can change the active channel by pressing the B Button to toggle between them. 

Dual-Left.jpg

 

Once you have the channel that you DON'T want to disable as the active channel, press the RED button on the front keypad. LCD2.jpg

Press the RED to disable the Receive on the standby channel.

RX Dissabled.jpg

If you get a message saying the  "Keypad is locked", you have 2 options to unlock it.

keypad locaked.jpg

  1. Turn the radio off, then on again - the keypad will be unlocked for 15 seconds on radio startup,
  2. Use the Keypad to unlock the Keypad. This is done by pressing the Green button, then the * button.  Once done, you should see a message on the screen saying "Keypad Unlocked" 

unlock_Buttonpress.jpg

Once unlocked, you can now press the RED button to disable the standby channel.

To enable - Press the red button again. The disabled marker should disappear. 

 

 

Back to top