Recently Updated Pages
DMR vs Analogue Radios: What's the Difference?
If you've ever used a 2-way radio, you've probably experienced analog-FM (frequency modulation) r...
Who and what is RSM? (And why should I care?)
RSM (Radio Spectrum Management) RSM in the NZ governing body when it comes to anything related t...
Overseas Radio Equipment Purchases
Purchasing radio equipment from non-nz licensed radio dealers is fraught with danger. The NZ regu...
Fhz (Channels) Information for NZ Motorsport
In the first instance to clear up a interchangeable term, channels and Fhz (frequency) A Fhz is w...
Advanced Radio Functions
Your radio includes several advanced features that can be activated using the channel up/down key...
Introduction
Thank you for purchasing your Speedtech Motorsports Receiver.These instructions are designed to p...
Support
After Sales SupportSpeedtech offers full support for all products sold, available via email or ph...
Channels
Please ensure you select the correct channel for the Motorsport service you wish to receive using...
How to Change Receive Channel
The radio receives a second channel, and in New Zealand we have 2 channels that could be used at ...
Radio Communication Troubleshooting Guide
Before You Start Make sure both radios are powered on and set to the same channel. This is the mo...
Installing Your Handheld DMR Race Radio
What You Need Your DMR handheld radio A suitable mounting location in the car Optional: adhesive...
Getting Started with Your Speedtech Radios
Pre-Installation Testing We've designed these radios to be straightforward to use. Before install...
Radio Components
It is important to understand the different components and buttons around the radio. These enable...
Setting the Squelch (Only applies to ANALOGUE Channels)
Analogue channels are susceptible to noise. Noise can be described in many ways and is often reco...
Enable Keypad
If you get a message saying the "Keypad is locked", you have 2 options to unlock it. Turn the ...
Standby Channel Recieve Dissable
The radio can disable one of the channels. To disable a channel, ensure the channel that you want...
LCD Display
Firstly, to determine the default settings for the radio. This is MOST likely how you will have t...
Introduction
The dual receive radio comes in two variants, the 10-watt and 5-watt versions. By default, we are...
SimHub Installation
Requirements SimHub installed (any recent version) iRacing Windows 10 or 11 iReporter Button Box...
Using Conditional Statements in Messages
Conditional Messages iReporter supports conditional message lines using a simple bracket syntax. ...